Important Note: This filter replacement set is for model HCM-T7 only. You may change the filters by following instructions in our video available at our website, please remember to always switch off the water supply valve to the water dispenser before you change the filters.
Note on Air Bubbles After Filter Replacement
When using your new high-quality water filter for the first time, you may notice small air bubbles in the filtered water. This is completely normal and commonly occurs after replacing the filter.
These air bubbles can cause the water to appear slightly milky or cloudy at first. This effect is temporary and is simply due to tiny air pockets trapped inside the filter during installation. It does not affect the safety or quality of the water.
The bubbles will naturally dissipate within a few days as the filter stabilizes with regular use. Rest assured, the water is safe to drink. No special action is needed, though we recommend flushing the filter with a few liters of water after installation for best results.
Please contact us if you need assistance on how to change the filters. Thank you!
Sediment + Carbon Block Composite:
- Reliably remove coarse impurities such as sand, lime, algae, rust particles and turbidity from the water.
- Highly effective in eliminating particulate, microscopic, cysts, volatile organic chemicals (VOCs), chlorine, lead, microplastics, and other contaminants.
UF Membrane + ACF Composite:
- Highly effective in eliminating up to 99.99% bacteria, protozoa, colloids, and other microorganisms while keeping essential minerals intact.
- Further remove residual chlorine, colorants, peculiar smell, and improve the taste of the water.